Product Categories
A PLC is a stand-alone unit that can control one or more machines and is connected to them by cables. On the other hand, in an embedded control architecture the controller — which is almost always a printed circuit board (PCB) — is located inside the machine it controls.
The internet connects users from all over the world in a single massive network. Devices on the internet can talk to one another using the global infrastructure. Ethernet connects devices in a local area network (LAN), which is a much smaller collection of interconnected devices.
A switch connects devices such as a desktop, laptop, and access point to the router.
A router acts as a gateway to the computer network and is placed between a modem and a switch or hub.
A modem is used to connect to the Internet.
A router acts as a gateway to the computer network and is placed between a modem and a switch or hub.
A modem is used to connect to the Internet.
HMI Touch screen displays are panel-mounted devices with responsive touch screens for operator input. They display graphics and allow the easy selection of options, making them helpful in many industrial and commercial environments. The touch panels aid control and visualisation in a wide range of applications.
While IoT is typically used by consumers or end-users, IIoT is used for industrial purposes such as manufacturing, monitoring, and supply chain management.
An industrial gateway receives data from various factory devices and protocols and then forwards it to another location, such as the edge data center or the cloud, for analyzing and identifying data trends. Furthermore, the gateway can process data locally and perform functions such as filtering data.
A sensor is a device that measures physical input from its environment and converts it into data that can be interpreted by either a human or a machine. Most sensors are electronic (the data is converted into electronic data), but some are more simple, such as a glass thermometer, which presents visual data.
The most important part of any electronic system is the software. It actually makes the system. The data acquisition software brings together all data and allows for easy monitoring, analysis, and management even of complex industrial processes.
A SCADA system is a combination of hardware and software that enables the automation of industrial processes by capturing Operational Technology (OT) real-time data. SCADA connects the sensors that monitor equipment like motors, pumps, and valves to an onsite or remote server.
A SCADA system empowers organizations to:
A SCADA system is a combination of hardware and software that enables the automation of industrial processes by capturing Operational Technology (OT) real-time data. SCADA connects the sensors that monitor equipment like motors, pumps, and valves to an onsite or remote server.
A SCADA system empowers organizations to:
- Control processes locally or at remote locations.
- Acquire, analyze and display real-time data.
- Directly interact with industrial equipment such as sensors, valves, pumps, and motors.
- Record and archive events for future reference or report creation.
Power quality is the ability of a power grid to supply power to the consumers efficiently and it also expresses the ability of an equipment to consume the power being supplied to it. In technical terms, power quality is the measure, study and enhancement of sinusoidal waveform at the rated voltage and frequency.
Transducers and transmitters are virtually the same thing, in that both Transmitter and Transducer are devices which convert one form of energy into another form and give an output signal. The main difference being the kind of electrical signal each sends. A transducer sends a signal in volts (V) or millivolt (mV) and a transmitter sends a signal in milliamps (mA).
Transducers and transmitters are virtually the same thing, in that both Transmitter and Transducer are devices which convert one form of energy into another form and give an output signal. The main difference being the kind of electrical signal each sends. A transducer sends a signal in volts (V) or millivolt (mV) and a transmitter sends a signal in milliamps (mA).
Small Form-factor Pluggable (SFP) is a compact, hot-pluggable network interface module format used for both telecommunication and data communications applications. An SFP interface on networking hardware is a modular slot for a media-specific transceiver, such as for a fiber-optic cable or a copper cable. The advantage of using SFPs compared to fixed interfaces (e.g. modular connectors in Ethernet switches) is that individual ports can be equipped with different types of transceivers as required.
A flow computer is a specialized type of computer that uses complex calculations to interpret the data from flow meters and to calculate and record the volume of a particular flowing substance at a particular point in time. Flow computers can be used for gases or liquids and are in demand across various industries.
